2.4GHz Networking Configuration
See Logging into the ONT for help with logging in.
1. Select Network from the top-level menu, then Wireless 2.4GHz in the left-hand menu
2. Select enable WiFi checkbox to enable WiFi
3. Choose a WiFi mode from the drop-down menu
4. Choose 20 MHz or 40 MHz from the drop-down menu.
5. Choose a channel from the drop-down menu or choose Auto to have the channel automatically assigned
6. Choose the percentage transmitting power from the drop-down menu
7. Select this checkbox to enable or disable wireless multimedia
8. Enter the total number of MAX users
9. Choose the SSID from the drop-down menu
10. Enter the SSID name
11. Enable or disable SSID from this drop-down menu
12. Enable or disable SSID broadcast from this drop-down menu
13. Enter the number of MAX users
14. Choose an encryption mode from the drop-down menu:
• OPEN
• WEP
• WPA/WPA2 Personal
• WPA/WPA2 Enterprise
15. Choose a WPA version from the drop-down menu:
• WPA1
• WPA2
• WPA1/WPA2
16. Choose a WPA encryption mode from the drop-down menu:
• TKIP
• AES
• TKIP/AES
17. Enter the WPA key
18. Enable or disable WPS from this drop-down menu
19. Select a WPS mode from the drop-down menu:
• PBC (Push Button Connect)
• PIN AP (Personal Identification Number) generated by the AP (Access Point)
• PIN STA (Personal Identification Number) generated by the WiFi client (STA)
20. Click Save