Below are the steps to change settings for your 5 GHz band in the Nokia Gateway GUI.
Guide for Nokia 6 ONT
1. Select Network from the left side menu
2. From the left side menu, select "Wireless 5GHz."
3. Use the text boxes and drop-down boxes to edit/select changes to the settings of the 5 GHz band.
A. Under the Heading Wireless (5GHz) are settings for all SSIDs on the 5GHz band.
Options that can be configured (Wireless 5GHz)
| Name | Description |
| Wireless (5GHz) | |
| Enable | Select this checkbox to enable WiFi |
| Bandwidth | Choose from:
|
| Channel | Choose a channel from the drop-down menu or choose Auto to have the channel automatically assigned. |
| Transmitting Power | Choose a percentage for the transmitting power from the drop-down menu:
|
| WMM | Enable or disable wireless multimedia |
| Enable MU-MIMO | Choose Enable or disable MU-MIMO from this drop-down menuThe default is Enable, which enables users and wireless terminals to communicate with each other.MU-MIMO may decrease WiFi performance for clients who do not support it, in which case Nokia recommends that you choose Disable. |
| Total MAX Users | Enter the total number of MAX users |
B. Under SSID Configuration are settings for the SSID that is selected (SSID Select).
Options that can be configured (SSID Configuration)
| SSID Configuration | |
| SSID Select | Choose the SSID from the drop-down menu |
| SSID Name | Change the name of the selected SSID |
| Enable SSID | Choose Enable or disable SSID from this drop-down menu |
| SSID Broadcast | Choose Enable or disable SSID broadcast from this drop-down menu |
| Port Mode | Routed or Bridge |
| Isolation | Enable or disable Isolation |
| MAX Users | Enter the total number of MAX users |
| Encryption Mode | Choose an encryption mode from the drop-down menu: |
| WPA Key | Enter the WPA key |
| Enable WPS | Choose Enable or disable WPS from this drop-down menu |
| WPS Mode | Select a WPS mode from the list: • PBC • STA PIN • AP PIN |
| Domain Grouping | Check to enable Domain Grouping |
4. Click Save
Guide for Nokia Gateway 3 ONT
1. Select Network from the top-level menu
2. From the left side menu, select "Wireless 5GHz." 
3. Use the text boxes and drop-down boxes to edit/select changes to the settings of the 5 GHz band.
A. Under the Heading Wireless (5GHz) are settings for all SSIDs on the 5GHz band.
Options that can be configured (Wireless 5GHz)
| Field | Description |
| Wireless (5GHz) | |
| Enable | Select this checkbox to enable WiFi |
| Bandwidth | Choose from:
|
| Channel | Choose a channel from the drop-down menu or choose Auto to have the channel automatically assigned. |
| Transmitting Power | Choose a percentage for the transmitting power from the drop-down menu:
|
| WMM | Select this checkbox to enable or disable wireless multimedia |
| Enable MU-MIMO | Choose Enable or disable MU-MIMO from this drop-down menuThe default is Enable, which enables users and wireless terminals to communicate with each other.MU-MIMO may decrease WiFi performance for clients who do not support it, in which case Nokia recommends that you choose Disable. |
| Total MAX Users | Enter the total number of MAX users |
| DFS re-entry | Select this checkbox to enable or disable DFS re-entry |
B. Under SSID Configuration are settings for the SSID that is selected (SSID Select).
Options that can be configured (SSID Configuration)
| SSID Configuration | |
| SSID Select | Choose the SSID from the drop-down menu |
| SSID Name | Change the name of the selected SSID |
| Enable SSID | Choose Enable or disable SSID from this drop-down menu |
| SSID Broadcast | Choose Enable or disable SSID broadcast from this drop-down menu |
| MAX Users | Enter the number of MAX users |
| Encryption Mode | Choose an encryption mode from the drop-down menu: |
| WPA Key | Enter the WPA key |
| Enable WPS | Choose Enable or disable WPS from this drop-down menu |
| WPS Mode | Select a WPS mode from the list: • PBC • STA PIN • AP PIN |
4. Click Save